Dry Bulk Cement Tank-manufacture,factory,supplier from China

In civil engineering, dump truck trailers often work together with excavators, loaders, belt conveyors and other construction machinery to form a loading, transporting and unloading production line for the loading, unloading and transportation of earthwork, gravel and bulk materials. So what is the structural principle of the rear dump truck trailer? The editor will give you a brief introduction.The rear dump trailers control the movement of the piston rod through the control system. Backward tipping is common. Push the piston rod to make the carriage tip over, and a few two-way tipping.

When there is an electrical fault in the oil tank trailer, it is an important prerequisite for maintenance to quickly and accurately judge the fault. After a lot of practice and research for a long time, the maintenance engineers have realized that the following methods are very practical in electrical diagnosis.Observation methodIf the starter of the ofuel tanker trailer cannot be started, turn on the headlight first, observe its brightness, and judge whether the fault is caused by poor contact of the power line or battery power loss.

Changing the hydraulic oil looks like a simple job, but many friends of the driver of the rear-turning semi-trailer do not know how to change it correctly. They often mix the new and old hydraulic oil, which will greatly reduce the service life of the hydraulic system. So how to change the hydraulic oil of the rear tipper semi-trailer? Are there any precautions?The traditional method of replacing hydraulic oil for rear dump semi-trailer is nothing more than extracting the hydraulic oil from the hydraulic oil tank, replacing the hydraulic oil filter element, and then adding new hydraulic oil.

1. Pipeline laying and installationA. Arrange the pipeline reasonably according to the vehicle model. The long pipe shall be connected with the air storage tank of the rear relay valve. The length shall be appropriate and shall not be too loose or tight. The pipe clamp shall be locked on the thread clamp screw on the right side of the longitudinal dye. The thread clamp shall not be missed.

Semi trailers are widely used and cannot be replaced by ordinary vehicles. Almost all materials can be completed by semi trailers. Now let's take a look at the production process of semi-trailer.

First of all, the semi-trailer should do a systematic test during the running-in period to see whether the connection with the host is correct and safe and reliable, check whether there is any problem with the braking system, whether the tire pressure of the semi-trailer meets the standard, and check whether the various parts of the semi-trailer are loose, cracked and deformed.Subsequently, the load of the semi-trailer during the running-in period cannot exceed 80% of the rated load weight; During medium-speed driving, pay attention to the temperature of bearings and hubs.

Semi-trailer can transport large volume, and not easy to split large construction machinery, commercial goods, containers, can also transport vegetables, fruits, meat and other packaged fresh items, with good compatibility and speed.1. Intelligent interconnection of logistics vehiclesSemi - trailer intelligent interconnection is the trend.

In recent years, due to the interest trend, the semi-trailer market is mixed, and it is difficult to argue between true and false.

1. ChassisThe frame is mainly composed of girder - welded I-beam, support beam, connection beam, side beam, lock, traction pin connection device, panel, etc.The side beams are generally channel steel or bending pieces. At present, most trailers use channel steel. There will be more side beams for bending pieces with light body, because the requirements for strength are not too large.The supporting beam is the crossing beam, and now most of them are W beams. 2.  Upper bodyFor side wall trailers, the bodywork part refers to railings, gantries, etc.

Quality is the key to the development of enterprises.Shandong  Haoyue Vehicle Co., Ltd. selected high-quality material suppliers in  the industry, strictly screened raw materials, 100% of which were made  of titanium steel with sufficient thickness, and the warehousing of  materials was strictly controlled by professional quality inspectors.